I2S format was used by several high end companies for digital data transfer between components but there is no industry standard. You have to compare the Nuprime I2S pins spec with other brand’s spec to ensure compatibility. Usually most of the pins are compatible except PIN 14. If you have to choose a non Nuprime […]
Use the settings of MQA Core Decoder option in Roon. The options that work are: “decode and render” and “decode only”. Decode and render option should provide a better sound.
If your Windows USB audio is not working, go through the following diagnostic: Download and run Windows USB Troubleshooter Following these manual troubleshooting steps. To rule out any hardware failure, you should also verify that the NuPrime product is working with another computer.
Mac OSX does not support native DSD. It only supports DoP (DSD over PCM). Since encoding DSD into DoP requires twice the bandwidth, when using NuPrime’s DAC with Mac OSX, the support of DSD is limited to half of the maximum decoding capability of the DAC. From Audirvana: “To listen to DSD files from a […]
DAC-10 / 10H line out can be turned off by holding the Mute button for 3 seconds. The line out will not automatically turn off when the headphone is inserted because there are multiple headphone outputs. To enable the line out again, press and hold the Mute button for 3 seconds.
If you are not familiar with USB audio device, please read the FAQ topics on “What is USB Audio and how do I configure Windows or Mac computer for USB audio and the DAC ?” and “USB Standard and Ports” The standard USB audio cable that comes with your iOS or Android device can not […]
There are two ways to determine the sampling rate: Use meta data from the source music. If the meta data is wrong or the source does not contain any sampling rate data, then NuPrime device will not display the correct sampling rate. Even if the display does not show the correct sampling rate, the decoding will not […]
We recommend JRiver Media Center for its ease of use and setup. Please refer to this setup guide: https://nuprimeaudio.com//wp-content/uploads/JRiver-Configuration-for-DSD-Playback.pdf For Foobar please refer to this general purpose USB audio playback guide: foobar2000_dsd
Then follow this application note: https://www.synology.com/en-global/knowledgebase/DSM/help/AudioStation/playmusic “Enable high quality output for USB speakers” should be selected in the Audio Station’s Advanced Setting.
- 1
- 2